The Main Technical   Parameters of The Machine

1  The oil cylinder:ID   360mm, the rod:260mm ,the effective trip: 6.5m,  pressure:21Mpa,2 bars

The maximum thrust of the 2 cylinders:420 tons;   The working speed: 0-2000px/min ,

The max backward speed: 9500px/min.

2           The pump station:63scy-plunger pump :2 set, 18.5KW  Motor:    2sets (the main working pump)

3           PV2R13-23-116 double vane pump 1 set,15kw motor 1 set.

The hydraulic valve is integrated oil rout, hydraulic back fork   gate. Automatic feeding.   an   adjustable shelf (height and width) for the heating coils

3.  The frame for the   machine body: 30# channel steel, welded    with 43kg steel   rail

4  The panel for the main   engine: welded with 40-50mm medium steel sheet.

5  Distribution cabinets,   operation box 1   set

6  Intermediate-frequency   power (power 600KW  380v,220v,50/60Hz)

The scope of supply

A.  frame for the main   engine: 1set, hydraulic pump station: 1 set, main cylinders 2 pieces,front   and back fork door:1 block each .

B.distribution box    1set, Controlling ark 1 set.

C.  feeding shelf: 1 set

D  Shelf for the heating   coils :1 set

E.  other small cylinders   2 pieces

F  Intermediate-frequency   electric ark:1 piece,  reactor,   capacitor:1 set, 

G  water cable 500m㎡: 2 (L=3000mm)

K  Induction heating   coils: For OD 820-530mm , 1D and 1.5D (8 pieces in total)

L  The equipment   foundation drawing, hydraulic principle drawing, electrical diagram, machine   drawing, manual operating instruction

Skype:shonepole